Discussion:
NVAS admin panel issue
(too old to reply)
saurabh khandelwal
2018-07-10 15:04:06 UTC
Permalink
Hello Group,


We getting below message frequently on our syslog


EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453


I would like to remove these message and for doing this I logged into NVAS
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.


when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.





EMSPU1 Maintain User Parameters


&nb sp; GR Name :
Terminal: A01IP449

Application . . . ________ ACB Name: User . .:
AS54

Last Update . .: Group. .:
CRTGRP2

& nbsp;
Default Group: Y

Fill in or change the following:


Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;

Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)

Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)


Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;

Active Profile . . . . _ (1/2) If User Profile


Profile 1 Comment . . . _______________ Profile 2 Comment
_______________

Application ID Display _ (Y=Yes/N=No)





Variables for Logon profile:
;

&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________

&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________

&PWD . . . &NPW . . . &OPW . .
.




Enter a command: d (display), u (update), or l (list).




Can anybody help me to remove these EMS0675E message from NVAS

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
George Rodriguez
2018-07-10 15:32:28 UTC
Permalink
Instead of using ADM (used to administer applications and menu options of
NVAS) you have to use Netview on your NetView Application Selection Panel
and from there, you look for the message you want to suppress.

*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*


On Tue, Jul 10, 2018 at 11:04 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into NVAS
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
AS54
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.








----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
saurabh khandelwal
2018-07-10 15:47:02 UTC
Permalink
Hello George,

Thanks for reply. But in netview, where will i find these message entry, so
that I can delete.

I looked over internet and found that using option 4, I can remove these LU
but I am unable to get that panel.

Can you please help me to drive this task .

On Tue, Jul 10, 2018 at 6:32 PM, George Rodriguez <
Post by George Rodriguez
Instead of using ADM (used to administer applications and menu options of
NVAS) you have to use Netview on your NetView Application Selection Panel
and from there, you look for the message you want to suppress.
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*
On Tue, Jul 10, 2018 at 11:04 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into
NVAS
Post by saurabh khandelwal
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
AS54
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
George Rodriguez
2018-07-10 19:15:03 UTC
Permalink
It's been a while since I made changes to the file used to capture
messages. Let me check and I'll get back to you.


*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*


On Tue, Jul 10, 2018 at 11:46 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello George,
Thanks for reply. But in netview, where will i find these message entry, so
that I can delete.
I looked over internet and found that using option 4, I can remove these LU
but I am unable to get that panel.
Can you please help me to drive this task .
On Tue, Jul 10, 2018 at 6:32 PM, George Rodriguez <
Post by George Rodriguez
Instead of using ADM (used to administer applications and menu options of
NVAS) you have to use Netview on your NetView Application Selection Panel
and from there, you look for the message you want to suppress.
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*
On Tue, Jul 10, 2018 at 11:04 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into
NVAS
Post by saurabh khandelwal
but i m unable to get admin panel. . I just get parameter panel with
adm
Post by George Rodriguez
Post by saurabh khandelwal
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4
to
Post by George Rodriguez
Post by saurabh khandelwal
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
AS54
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.








----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
saurabh khandelwal
2018-07-11 06:06:18 UTC
Permalink
Thank you so much for help

On Tue, Jul 10, 2018 at 10:14 PM, George Rodriguez <
Post by George Rodriguez
It's been a while since I made changes to the file used to capture
messages. Let me check and I'll get back to you.
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*
On Tue, Jul 10, 2018 at 11:46 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello George,
Thanks for reply. But in netview, where will i find these message entry,
so
Post by saurabh khandelwal
that I can delete.
I looked over internet and found that using option 4, I can remove these
LU
Post by saurabh khandelwal
but I am unable to get that panel.
Can you please help me to drive this task .
On Tue, Jul 10, 2018 at 6:32 PM, George Rodriguez <
Post by George Rodriguez
Instead of using ADM (used to administer applications and menu options
of
Post by saurabh khandelwal
Post by George Rodriguez
NVAS) you have to use Netview on your NetView Application Selection
Panel
Post by saurabh khandelwal
Post by George Rodriguez
and from there, you look for the message you want to suppress.
*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*
On Tue, Jul 10, 2018 at 11:04 AM saurabh khandelwal <
Post by saurabh khandelwal
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into
NVAS
Post by saurabh khandelwal
but i m unable to get admin panel. . I just get parameter panel with
adm
Post by George Rodriguez
Post by saurabh khandelwal
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4
to
Post by George Rodriguez
Post by saurabh khandelwal
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
Application . . . ________ ACB Name: User .
AS54
Last Update . .: Group.
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _
(Y/N)
Post by saurabh khandelwal
Post by George Rodriguez
Post by saurabh khandelwal
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
------------------------------------------------------------
----------
Post by saurabh khandelwal
Post by George Rodriguez
Post by saurabh khandelwal
For IBM-MAIN subscribe / signoff / archive access instructions,
IBM-MAIN
Post by saurabh khandelwal
Post by George Rodriguez
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Elardus Engelbrecht
2018-07-10 17:50:10 UTC
Permalink
Post by saurabh khandelwal
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into NVAS but i m unable to get admin panel.
How are you defined to NVAS? Are you a System Administrator?
Post by saurabh khandelwal
... I am unable to get the panel to delete these LU.
You do that first in VTAMLST dataset and then remove the applications which are using those LUs after bouncing NVAS.
Post by saurabh khandelwal
when I type adm on main nvas screen , I get Maintain user parameters screen. I am unable to get this admin screen where i can use option 4 to delete these unwanted LU.
Option 4 is NOT going to help you there. See above.

Groete / Greetings
Elardus Engelbrecht

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
AlanWatthey , GMAIL
2018-07-11 07:13:54 UTC
Permalink
Saurabh,

As you were already told on the Netview forum, you need to be defined as an NVAS Administrator. Your userid is obviously not. However, you can instead update the settings in batch and then restart NVAS.

Regards,
Alan Watthey

-----Original Message-----
From: saurabh khandelwal [mailto:***@GMAIL.COM]
Sent: 10 July 2018 6:04 pm
Subject: NVAS admin panel issue

Hello Group,


We getting below message frequently on our syslog


EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453

EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453


I would like to remove these message and for doing this I logged into NVAS
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.


when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.





EMSPU1 Maintain User Parameters


&nb sp; GR Name :
Terminal: A01IP449

Application . . . ________ ACB Name: User . .:
AS54

Last Update . .: Group. .:
CRTGRP2

& nbsp;
Default Group: Y

Fill in or change the following:


Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;

Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)

Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)


Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;

Active Profile . . . . _ (1/2) If User Profile


Profile 1 Comment . . . _______________ Profile 2 Comment
_______________

Application ID Display _ (Y=Yes/N=No)





Variables for Logon profile:
;

&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________

&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________

&PWD . . . &NPW . . . &OPW . .
.




Enter a command: d (display), u (update), or l (list).




Can anybody help me to remove these EMS0675E message from NVAS

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
saurabh khandelwal
2018-07-11 21:13:23 UTC
Permalink
Hello Alan,

As I am new to NVAS, can you please suggest how my user id can be defined
as NVAS administrator.
Post by AlanWatthey , GMAIL
Saurabh,
As you were already told on the Netview forum, you need to be defined as
an NVAS Administrator. Your userid is obviously not. However, you can
instead update the settings in batch and then restart NVAS.
Regards,
Alan Watthey
-----Original Message-----
Sent: 10 July 2018 6:04 pm
Subject: NVAS admin panel issue
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into NVAS
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
AS54
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
George Rodriguez
2018-07-12 11:41:14 UTC
Permalink
On the ADM menu there's an option 7 - Define an Administrator for making a
regular user an administrator. You need to be an Admin already to use this
option. If I'm right, the initial system came with a default administrator.
To get a list of who's already define as an administrator, select option 7,
on option User enter a ? and on the command line enter l (list).

Let me know if this answers your question.

*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*


On Wed, Jul 11, 2018 at 5:13 PM saurabh khandelwal <
Post by saurabh khandelwal
Hello Alan,
As I am new to NVAS, can you please suggest how my user id can be defined
as NVAS administrator.
Post by AlanWatthey , GMAIL
Saurabh,
As you were already told on the Netview forum, you need to be defined as
an NVAS Administrator. Your userid is obviously not. However, you can
instead update the settings in batch and then restart NVAS.
Regards,
Alan Watthey
-----Original Message-----
Sent: 10 July 2018 6:04 pm
Subject: NVAS admin panel issue
Hello Group,
We getting below message frequently on our syslog
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXMAP RC=00001453
EMS0675E VTAM INQUIRE FAILED FOR LU=A1OXCICS RC=00001453
I would like to remove these message and for doing this I logged into
NVAS
Post by AlanWatthey , GMAIL
but i m unable to get admin panel. . I just get parameter panel with adm
command but I am unable to get the panel to delete these LU.
when I type adm on main nvas screen , I get Maintain user parameters
screen. I am unable to get this admin screen where i can use option 4 to
delete these unwanted LU.
EMSPU1 Maintain User Parameters
Terminal: A01IP449
AS54
CRTGRP2
& nbsp;
Default Group: Y
Selection ID . . . . . __ (1-99) Default Application _ (Y/N)
;
Msg. Received Indicator _ (N=Normal/J=Jump/I=
Information)
Jump Key . . . . . . . ____ (PFnn/PAnn/ATTN)
Logon Profile . . . . . _ (U=User/G=Group/S=System)
&nbs p;
Active Profile . . . . _ (1/2) If User Profile
Profile 1 Comment . . . _______________ Profile 2 Comment
_______________
Application ID Display _ (Y=Yes/N=No)
;
&UID . . . ________ &UVAR1 . . ________ &UVAR2 . .
________
&ACCNO . . ________ &UVAR3 . . ________ &UVAR4 . .
________
&PWD . . . &NPW . . . &OPW . .
.
Enter a command: d (display), u (update), or l (list).
Can anybody help me to remove these EMS0675E message from NVAS
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.








----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Elardus Engelbrecht
2018-07-12 11:58:03 UTC
Permalink
On the ADM menu there's an option 7 - Define an Administrator for making a regular user an administrator. You need to be an Admin already to use this option. If I'm right, the initial system came with a default administrator.
The default one is PUBUSER. What the password is, is a guess. If RACF is required to logon, it should be easy to fix that.
To get a list of who's already define as an administrator, select option 7, on option User enter a ? and on the command line enter l (list).
Of course you need to be an admin in the first place... ;-)

Or run this job:

//BATCHLO EXEC PGM=EMSBXPMC,REGION=2M,
// PARM='EXEC,UID=PUBUSER,UNLOCK'
//STEPLIB DD DSN=?=SHR
//EMSBSRTS DD DSN=?,DISP=SHR
//EMSBSRTG DD DSN=?,DISP=SHR
//EMSBSRTU DD DSN=?,DISP=SHR
//EMSBPLDT DD DSN=?,DISP=SHR
//EMSBGPRF DD DSN=?,DISP=SHR
//EMSBALLT DD DSN=?,DISP=SHR
//EMSBGAL DD DSN=?,DISP=SHR
//SYSPRINT DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBREPO DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBLIST DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//SYSUDUMP DD SYSOUT=*
//EMSBCOMM DD *
LIST ADMINISTRATOR,
USER_ID=*,
GROUP_NAME=*

Groete / Greetings
Elardus Engelbrecht

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
George Rodriguez
2018-07-12 12:14:14 UTC
Permalink
Thanks for the info, Elardus, I wasn't sure if you needed to be an admin to
just do a display!

*George Rodriguez*
*Specialist II - IT Solutions*
*IT Enterprise Applications*
*PX - 47652*
*(561) 357-7652 (office)*
*(954) 415-7586 (mobile)*
*School District of Palm Beach County*
*3348 Forest Hill Blvd.*
*Room B-251*
*West Palm Beach, FL. 33406-5869*
*Florida's Only A-Rated Urban District For Eight Consecutive Years*


On Thu, Jul 12, 2018 at 7:57 AM Elardus Engelbrecht <
Post by George Rodriguez
On the ADM menu there's an option 7 - Define an Administrator for making
a regular user an administrator. You need to be an Admin already to use
this option. If I'm right, the initial system came with a default
administrator.
The default one is PUBUSER. What the password is, is a guess. If RACF is
required to logon, it should be easy to fix that.
Post by George Rodriguez
To get a list of who's already define as an administrator, select option
7, on option User enter a ? and on the command line enter l (list).
Of course you need to be an admin in the first place... ;-)
//BATCHLO EXEC PGM=EMSBXPMC,REGION=2M,
// PARM='EXEC,UID=PUBUSER,UNLOCK'
//STEPLIB DD DSN=?=SHR
//EMSBSRTS DD DSN=?,DISP=SHR
//EMSBSRTG DD DSN=?,DISP=SHR
//EMSBSRTU DD DSN=?,DISP=SHR
//EMSBPLDT DD DSN=?,DISP=SHR
//EMSBGPRF DD DSN=?,DISP=SHR
//EMSBALLT DD DSN=?,DISP=SHR
//EMSBGAL DD DSN=?,DISP=SHR
//SYSPRINT DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBREPO DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBLIST DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//SYSUDUMP DD SYSOUT=*
//EMSBCOMM DD *
LIST ADMINISTRATOR,
USER_ID=*,
GROUP_NAME=*
Groete / Greetings
Elardus Engelbrecht
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
*Disclaimer: *Under Florida law, e-mail addresses are public records.
If you do not want your e-mail address released in response to a public
records request, do not send electronic mail to this entity. Instead,
contact this office by phone or in writing.








----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
saurabh khandelwal
2018-07-15 12:38:17 UTC
Permalink
Hello Elardus *,*

Sorry for late reply.

I run this BATCHLO utility and output was

NV/AS Batch Load & Reporting
Initialization





NV/AS Batch Load & Reporting Options:





EXEC,UID=PUBUSER,UNLOCK






Consistency Check of the NV/AS Database





NV/AS Batch Load & Reporting
Statistics







Correct commands: 0



Incorrect commands: 0


Total commands: 0




Couple of other points,

1) I didnt find pubuser in our RACF
2) Now we are not able to get into admin panel because, we don't know which
user is having admin access.
3) Is there any way that we can use this pubuser to define other admin
user. But not sure how.


On Thu, Jul 12, 2018 at 2:57 PM, Elardus Engelbrecht <
Post by George Rodriguez
On the ADM menu there's an option 7 - Define an Administrator for making
a regular user an administrator. You need to be an Admin already to use
this option. If I'm right, the initial system came with a default
administrator.
The default one is PUBUSER. What the password is, is a guess. If RACF is
required to logon, it should be easy to fix that.
Post by George Rodriguez
To get a list of who's already define as an administrator, select option
7, on option User enter a ? and on the command line enter l (list).
Of course you need to be an admin in the first place... ;-)
//BATCHLO EXEC PGM=EMSBXPMC,REGION=2M,
// PARM='EXEC,UID=PUBUSER,UNLOCK'
//STEPLIB DD DSN=?=SHR
//EMSBSRTS DD DSN=?,DISP=SHR
//EMSBSRTG DD DSN=?,DISP=SHR
//EMSBSRTU DD DSN=?,DISP=SHR
//EMSBPLDT DD DSN=?,DISP=SHR
//EMSBGPRF DD DSN=?,DISP=SHR
//EMSBALLT DD DSN=?,DISP=SHR
//EMSBGAL DD DSN=?,DISP=SHR
//SYSPRINT DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBREPO DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBLIST DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//SYSUDUMP DD SYSOUT=*
//EMSBCOMM DD *
LIST ADMINISTRATOR,
USER_ID=*,
GROUP_NAME=*
Groete / Greetings
Elardus Engelbrecht
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Elardus Engelbrecht
2018-07-15 17:15:43 UTC
Permalink
Post by saurabh khandelwal
Sorry for late reply.
That is Ok. It is seldom I look at IBM-MAIN on a Sunday, but we are now IPLing and I need to check something. ;-)
Post by saurabh khandelwal
I run this BATCHLO utility and output was
Correct commands: 0
Your JCL is wrong. Check it again. I expect Correct commands > 0
Post by saurabh khandelwal
1) I didnt find pubuser in our RACF
Now, have it registered in RACF and try again the job and try to logon to NVAS to see that panel you want to see.
Post by saurabh khandelwal
3) Is there any way that we can use this pubuser to define other admin user. But not sure how.
There is no other way, AFAIK.

Groete / Greetings
Elardus Engelbrecht

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
AlanWatthey , GMAIL
2018-07-16 07:54:31 UTC
Permalink
If you look in the EMSGAL VSAM dataset you will see all the defined administrators. You may have to REPRO the data out to a flat file to read it of course. There are different types of administrators (system, group, broadcast) so you'll have to work out which is which but if you know your users this should fairly obvious. I'm not sure but there may be an 'S' in the entry for a system operator.

Regards,
Alan Watthey

-----Original Message-----
From: saurabh khandelwal [mailto:***@GMAIL.COM]
Sent: 15 July 2018 3:38 pm
Subject: Re: NVAS admin panel issue

Hello Elardus *,*

Sorry for late reply.

I run this BATCHLO utility and output was

NV/AS Batch Load & Reporting
Initialization





NV/AS Batch Load & Reporting Options:





EXEC,UID=PUBUSER,UNLOCK






Consistency Check of the NV/AS Database





NV/AS Batch Load & Reporting
Statistics







Correct commands: 0



Incorrect commands: 0


Total commands: 0




Couple of other points,

1) I didnt find pubuser in our RACF
2) Now we are not able to get into admin panel because, we don't know which
user is having admin access.
3) Is there any way that we can use this pubuser to define other admin
user. But not sure how.


On Thu, Jul 12, 2018 at 2:57 PM, Elardus Engelbrecht <
Post by George Rodriguez
On the ADM menu there's an option 7 - Define an Administrator for making
a regular user an administrator. You need to be an Admin already to use
this option. If I'm right, the initial system came with a default
administrator.
The default one is PUBUSER. What the password is, is a guess. If RACF is
required to logon, it should be easy to fix that.
Post by George Rodriguez
To get a list of who's already define as an administrator, select option
7, on option User enter a ? and on the command line enter l (list).
Of course you need to be an admin in the first place... ;-)
//BATCHLO EXEC PGM=EMSBXPMC,REGION=2M,
// PARM='EXEC,UID=PUBUSER,UNLOCK'
//STEPLIB DD DSN=?=SHR
//EMSBSRTS DD DSN=?,DISP=SHR
//EMSBSRTG DD DSN=?,DISP=SHR
//EMSBSRTU DD DSN=?,DISP=SHR
//EMSBPLDT DD DSN=?,DISP=SHR
//EMSBGPRF DD DSN=?,DISP=SHR
//EMSBALLT DD DSN=?,DISP=SHR
//EMSBGAL DD DSN=?,DISP=SHR
//SYSPRINT DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBREPO DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//EMSBLIST DD SYSOUT=*,DCB=(LRECL=133,RECFM=FBA)
//SYSUDUMP DD SYSOUT=*
//EMSBCOMM DD *
LIST ADMINISTRATOR,
USER_ID=*,
GROUP_NAME=*
Groete / Greetings
Elardus Engelbrecht
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
--
Thanks & Regards
Saurabh Khandelwal

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Loading...