Discussion:
SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE
Add Reply
Mike Wawiorko
2017-08-23 08:27:08 UTC
Reply
Permalink
Raw Message
This is my RFE.

Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?

Headline:
Support EZANS as part of z/OS Communications Server

ID:
59073

Mike Wawiorko  

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Cieri, Anthony
Sent: 22 August 2017 20:47
To: IBM-***@LISTSERV.UA.EDU
Subject: SPF Panels for TCP/IP (was HSM Query command)


This mail originated from outside our organisation - ***@SEIC.COM


Sorry for the segue into a new thread, but.....

There is a SPF Utility that basically provides a full screen ISPF interface to the NETSTAT command. It can be found at the following url:

http://www-01.ibm.com/support/docview.wss?uid=swg24029203

It is called the IBM z/OS Communications Server Network Utility Assistant. It is a pretty neat little tool. I am not sure of the support status for it. I believe that "as is", it stopped working around z/OS V1.13. However, the changes necessary to make it functional again, are only required in the Rexx code that determine the z/OS System level and are relatively minor. I also believe that there is an RFE that is requesting formal support from IBM. I don't know the status or the RFE number.

I am currently running z/OS V2.1 and have this operating sufficiently in our environment.

Hth
Tony



-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht
Sent: Tuesday, August 22, 2017 7:41 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Re: HSM Query command
That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?
HSM is more of a background thing. Perhaps you should say what functions (status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you want to see in ISPF panels (or I prefer, in ISMF)?
Wouldn't it be nice to have some entry in ISMF like RMM has?
It would be really nice, I agree.
There are two components which lack panels: VTAM and HSM.
Netview (separate product of course) has panels which you can use to manage your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons.

Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.

Barclays Bank PLC is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority (Financial Services Register No. 122702).

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Cieri, Anthony
2017-08-23 18:19:03 UTC
Reply
Permalink
Raw Message
Thanks for the RFE #

Up to 77 votes!!!

Tony



-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Mike Wawiorko
Sent: Wednesday, August 23, 2017 4:28 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE

This is my RFE.

Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?

Headline:
Support EZANS as part of z/OS Communications Server

ID:
59073

Mike Wawiorko  

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Cieri, Anthony
Sent: 22 August 2017 20:47
To: IBM-***@LISTSERV.UA.EDU
Subject: SPF Panels for TCP/IP (was HSM Query command)


This mail originated from outside our organisation - ***@SEIC.COM


Sorry for the segue into a new thread, but.....

There is a SPF Utility that basically provides a full screen ISPF interface to the NETSTAT command. It can be found at the following url:

http://www-01.ibm.com/support/docview.wss?uid=swg24029203

It is called the IBM z/OS Communications Server Network Utility Assistant. It is a pretty neat little tool. I am not sure of the support status for it. I believe that "as is", it stopped working around z/OS V1.13. However, the changes necessary to make it functional again, are only required in the Rexx code that determine the z/OS System level and are relatively minor. I also believe that there is an RFE that is requesting formal support from IBM. I don't know the status or the RFE number.

I am currently running z/OS V2.1 and have this operating sufficiently in our environment.

Hth
Tony



-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht
Sent: Tuesday, August 22, 2017 7:41 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Re: HSM Query command
That remains me a fundamental question: WHY DFHSM DOES NOT HAVE ISPF PANELS?
HSM is more of a background thing. Perhaps you should say what functions (status of MCDS, BCDS, active processes, hold/release HSM actions, etc.) you want to see in ISPF panels (or I prefer, in ISMF)?
Wouldn't it be nice to have some entry in ISMF like RMM has?
It would be really nice, I agree.
There are two components which lack panels: VTAM and HSM.
Netview (separate product of course) has panels which you can use to manage your VTAM network.

I would also prefer to see some panels (or webpages) doing the same for TCP/IP.

I can dream about such gems,... ;-)
Perhaps if you can submit a good reason/excuse, big blue may listen to you...

Groete / Greetings
Elardus Engelbrecht

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons.

Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.

Barclays Bank PLC is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority (Financial Services Register No. 122702).

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Ed Jaffe
2017-08-27 22:09:29 UTC
Reply
Permalink
Raw Message
Post by Mike Wawiorko
This is my RFE.
Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?
What happens when you reach 100 votes?
--
Phoenix Software International
Edward E. Jaffe
Chief Technology Officer
831 Parkview Drive North
El Segundo, CA 90245
http://www.phoenixsoftware.com/

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Edward Gould
2017-08-28 05:16:21 UTC
Reply
Permalink
Raw Message
Post by Ed Jaffe
Post by Mike Wawiorko
This is my RFE.
Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?
What happens when you reach 100 votes?

He gets a lollipop.

Ed
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Mike Wawiorko
2017-08-29 08:39:25 UTC
Reply
Permalink
Raw Message
It is a purely symbolic point at which IBM might realise that keeping it as 'uncommitted candidate' rather than meeting the RFE is becoming embarrassing.

I'm sure you all knew what I meant.

Mike Wawiorko 

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Edward Gould
Sent: 28 August 2017 06:07
To: IBM-***@LISTSERV.UA.EDU
Subject: Re: SPF Panels for TCP/IP (was HSM Query command) - EZANS RFE
Post by Ed Jaffe
Post by Mike Wawiorko
This is my RFE.
Currently 75 votes supporting it but only uncommitted candidate.
Can we get it to over a hundred votes?
What happens when you reach 100 votes?

He gets a lollipop.

Ed
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons.

Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group.

Barclays Bank PLC. Registered in England and Wales (registered no. 1026167). Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.

Barclays Bank PLC is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority (Financial Services Register No. 122702).

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Loading...