Discussion:
Friday Fun: hcd charts to htm via b2h issue
(too old to reply)
Dyck, Lionel B. , TRA
2017-07-28 11:34:25 UTC
Permalink
Raw Message
Has anyone successfully used b2h for an iodf chart on z/OS?

I've uploaded b2h and created both lcu and switch charts and when I run them I get these errors on z/OS

|B2H455 WARNING: :xmp scale='.6 ' :ih1.control unit, by # :i2.1000
|B2H455 WARNING: (in line 1789 of T311LBD.IODF1.REPORT)
|B2H317 ERROR: RC=1 output record truncated while writing to DD=B2H00007 DSN='T311LBD.B0029556.$TMP0391' Record='  &nbs
p;  |           |        &
nbsp;  |           |       &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;    |           |      &
nbsp;    |           |'
|B2H107 Info: Highest RC=8

When I run it under oorexx under windows the lcu chart looks great but the switch charts has these anomalies:

0 1 2 0 1 3
&bx0220.&bx0202.00&bx0202.&bx0202.02&bx0202.&bx0202.04&bx0202.&bx0202.06&bx0202.&bx0202.07&bx0202.&bx0202.08&bx0202.&bx0202.09&bx0202.&bx0202.0A&bx0202.&bx0202.0B&bx0202.&bx0202.0C&bx0202.&bx0202.0D&bx0202.&bx0202.0E&bx0202.&bx0202.0F&bx0202.&bx0202.10&bx0202.&bx0202.12&bx0202.&bx0202.14&bx0202.&bx0202.16&bx0202.&bx0202.17&bx0202.&bx0202.18&bx0202.&bx0202.19&bx0202.&bx0202.1A&bx0202.&bx0202.1B&bx0202.&bx0202.1C&bx0202.&bx0202.1D&bx0202.&bx0202.1E&bx0202.&bx0202.1F&bx0202.&bx0202.20&bx0202.&bx0202.21&bx0202.&bx0202.22&bx0202.&bx0202.23&bx0202.&bx0202.24&bx0202.&bx0202.25&bx0202.&bx0202.26&bx0202.&bx0202.27&bx0202.&bx0202.28&bx0202.&bx0202.29&bx0202.&bx0202.2A&bx0202.&bx0202.2B&bx0202.&bx0202.2C&bx0202.&bx0202.2D&bx0202.&bx0202.2E&bx0202.&bx0202.2F&bx0202.&bx0202.30&bx0202.&bx0202.31&bx0202.&bx0202.32&bx0202.&bx0202.33&bx0202.&bx0202.34&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.
&bx2020.
&bx2020.

Any advice/suggestions?

I can't see spending the $$$$ that IBM is asking for DCF as this is the only reason we would use it.

Thanks in advance

--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Cieri, Anthony
2017-07-28 19:28:43 UTC
Permalink
Raw Message
Great minds must think alike!!!!

After seeing this recently in a thread here, I decided to download B2H and try it.

I initially received the exact same error you have listed below. To get past this issue, I changed the default MVS Dataset Allocations (search on MVSAlloc) to use an LRECL of 2048. At approximately line 467, I have the following:

MVSalloc. ='DSORG(PS) LRECL(2048) RECFM(V) TRACKS SPACE(5,5) RELEASE'

This change did get me past the B2H317 error and I did ultimately produce an html file. However, some of the boxes did NOT format correctly........

I am still tinkering with it............

Good Luck
Hth
Tony


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Dyck, Lionel B. (TRA)
Sent: Friday, July 28, 2017 7:36 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Friday Fun: hcd charts to htm via b2h issue

Has anyone successfully used b2h for an iodf chart on z/OS?

I've uploaded b2h and created both lcu and switch charts and when I run them I get these errors on z/OS

|B2H455 WARNING: :xmp scale='.6 ' :ih1.control unit, by # :i2.1000
|B2H455 WARNING: (in line 1789 of T311LBD.IODF1.REPORT)
|B2H317 ERROR: RC=1 output record truncated while writing to DD=B2H00007 DSN='T311LBD.B0029556.$TMP0391' Record='  &nbs
p;  |           |        &
nbsp;  |           |       &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;    |           |      &
nbsp;    |           |'
|B2H107 Info: Highest RC=8

When I run it under oorexx under windows the lcu chart looks great but the switch charts has these anomalies:

0 1 2 0 1 3
&bx0220.&bx0202.00&bx0202.&bx0202.02&bx0202.&bx0202.04&bx0202.&bx0202.06&bx0202.&bx0202.07&bx0202.&bx0202.08&bx0202.&bx0202.09&bx0202.&bx0202.0A&bx0202.&bx0202.0B&bx0202.&bx0202.0C&bx0202.&bx0202.0D&bx0202.&bx0202.0E&bx0202.&bx0202.0F&bx0202.&bx0202.10&bx0202.&bx0202.12&bx0202.&bx0202.14&bx0202.&bx0202.16&bx0202.&bx0202.17&bx0202.&bx0202.18&bx0202.&bx0202.19&bx0202.&bx0202.1A&bx0202.&bx0202.1B&bx0202.&bx0202.1C&bx0202.&bx0202.1D&bx0202.&bx0202.1E&bx0202.&bx0202.1F&bx0202.&bx0202.20&bx0202.&bx0202.21&bx0202.&bx0202.22&bx0202.&bx0202.23&bx0202.&bx0202.24&bx0202.&bx0202.25&bx0202.&bx0202.26&bx0202.&bx0202.27&bx0202.&bx0202.28&bx0202.&bx0202.29&bx0202.&bx0202.2A&bx0202.&bx0202.2B&bx0202.&bx0202.2C&bx0202.&bx0202.2D&bx0202.&bx0202.2E&bx0202.&bx0202.2F&bx0202.&bx0202.30&bx0202.&bx0202.31&bx0202.&bx0202.32&bx0202.&bx0202.33&bx0202.&bx0202.34&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.
&bx2020.
&bx2020.

Any advice/suggestions?

I can't see spending the $$$$ that IBM is asking for DCF as this is the only reason we would use it.

Thanks in advance

--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Dyck, Lionel B. , TRA
2017-07-31 11:28:55 UTC
Permalink
Raw Message
Made the following changes e SYM file to resolve the unknown symbols:

:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |

I also changed the code thus as the code appeared to assume PROFILE NOPREFIX and kept failing until I did this.

then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */

The command I run for my report is

'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'

And then I use XMITIP to email the html file to myself and it works nicely.

--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Cieri, Anthony
Sent: Friday, July 28, 2017 2:30 PM
To: IBM-***@LISTSERV.UA.EDU
Subject: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue

Great minds must think alike!!!!

After seeing this recently in a thread here, I decided to download B2H and try it.

I initially received the exact same error you have listed below. To get past this issue, I changed the default MVS Dataset Allocations (search on MVSAlloc) to use an LRECL of 2048. At approximately line 467, I have the following:

MVSalloc. ='DSORG(PS) LRECL(2048) RECFM(V) TRACKS SPACE(5,5) RELEASE'

This change did get me past the B2H317 error and I did ultimately produce an html file. However, some of the boxes did NOT format correctly........

I am still tinkering with it............

Good Luck
Hth
Tony


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Dyck, Lionel B. (TRA)
Sent: Friday, July 28, 2017 7:36 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Friday Fun: hcd charts to htm via b2h issue

Has anyone successfully used b2h for an iodf chart on z/OS?

I've uploaded b2h and created both lcu and switch charts and when I run them I get these errors on z/OS

|B2H455 WARNING: :xmp scale='.6 ' :ih1.control unit, by # :i2.1000
|B2H455 WARNING: (in line 1789 of T311LBD.IODF1.REPORT)
|B2H317 ERROR: RC=1 output record truncated while writing to DD=B2H00007 DSN='T311LBD.B0029556.$TMP0391' Record='  &nbs
p;  |           |        &
nbsp;  |           |       &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;   |           |       &
nbsp;   |           |      &nbs
p;    |           |      &
nbsp;    |           |'
|B2H107 Info: Highest RC=8

When I run it under oorexx under windows the lcu chart looks great but the switch charts has these anomalies:

0 1 2 0 1 3
&bx0220.&bx0202.00&bx0202.&bx0202.02&bx0202.&bx0202.04&bx0202.&bx0202.06&bx0202.&bx0202.07&bx0202.&bx0202.08&bx0202.&bx0202.09&bx0202.&bx0202.0A&bx0202.&bx0202.0B&bx0202.&bx0202.0C&bx0202.&bx0202.0D&bx0202.&bx0202.0E&bx0202.&bx0202.0F&bx0202.&bx0202.10&bx0202.&bx0202.12&bx0202.&bx0202.14&bx0202.&bx0202.16&bx0202.&bx0202.17&bx0202.&bx0202.18&bx0202.&bx0202.19&bx0202.&bx0202.1A&bx0202.&bx0202.1B&bx0202.&bx0202.1C&bx0202.&bx0202.1D&bx0202.&bx0202.1E&bx0202.&bx0202.1F&bx0202.&bx0202.20&bx0202.&bx0202.21&bx0202.&bx0202.22&bx0202.&bx0202.23&bx0202.&bx0202.24&bx0202.&bx0202.25&bx0202.&bx0202.26&bx0202.&bx0202.27&bx0202.&bx0202.28&bx0202.&bx0202.29&bx0202.&bx0202.2A&bx0202.&bx0202.2B&bx0202.&bx0202.2C&bx0202.&bx0202.2D&bx0202.&bx0202.2E&bx0202.&bx0202.2F&bx0202.&bx0202.30&bx0202.&bx0202.31&bx0202.&bx0202.32&bx0202.&bx0202.33&bx0202.&bx0202.34&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.&bx0202.
&bx2020.
&bx2020.

Any advice/suggestions?

I can't see spending the $$$$ that IBM is asking for DCF as this is the only reason we would use it.

Thanks in advance

--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Dana Mitchell
2017-08-02 15:08:27 UTC
Permalink
Raw Message
Lionel,

Excellent work with B2H, I've been experimenting with it also. I like it, the price is right!
One question, when I produce the HCD report with 'No Index' I receive the following error:

B2H: Abend in line 7208 of B2H, RC=30
B2H: CondxC : SYNTAX
B2H: CondxD :
B2H: ErrText: Name or string > 250 characters
B2H: Source : return word(Abbrev.daid daid,1)
|B2H107 Info: Highest RC=30

Anyone else seen this, or is this perhaps something specific to our HCD report? I'm in the process of debugging b2h to see what part of the HCD report is causing this.

Thanks
Dana
Post by Dyck, Lionel B. , TRA
:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |
I also changed the code thus as the code appeared to assume PROFILE NOPREFIX and kept failing until I did this.
then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */
The command I run for my report is
'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'
And then I use XMITIP to email the html file to myself and it works nicely.
--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Dyck, Lionel B. , TRA
2017-08-02 15:43:05 UTC
Permalink
Raw Message
Try using 'noindex' instead of 'no index'. You could also use index=no


--------------------------------------------------------------------------
Lionel B. Dyck


-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Dana Mitchell
Sent: Wednesday, August 02, 2017 10:10 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue

Lionel,

Excellent work with B2H, I've been experimenting with it also. I like it, the price is right!
One question, when I produce the HCD report with 'No Index' I receive the following error:

B2H: Abend in line 7208 of B2H, RC=30
B2H: CondxC : SYNTAX
B2H: CondxD :
B2H: ErrText: Name or string > 250 characters
B2H: Source : return word(Abbrev.daid daid,1)
|B2H107 Info: Highest RC=30

Anyone else seen this, or is this perhaps something specific to our HCD report? I'm in the process of debugging b2h to see what part of the HCD report is causing this.

Thanks
Dana
Post by Dyck, Lionel B. , TRA
:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |
I also changed the code thus as the code appeared to assume PROFILE NOPREFIX and kept failing until I did this.
then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */
The command I run for my report is
'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'
And then I use XMITIP to email the html file to myself and it works nicely.
-----------------------------------------------------------------------
---
Lionel B. Dyck
Mainframe Systems Programmer - TRA
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Martin Packer
2017-08-03 06:46:57 UTC
Permalink
Raw Message
By the way, as a frequent (almost daily) user of B2H in Production, I
wonder: What is the copyright status of B2H? I think it's abandonware and
would like to treat it as open source.

In short, I'd join any effort to maintain B2H.

Thoughts?

Martin

Sent from my iPad
Post by Dyck, Lionel B. , TRA
Try using 'noindex' instead of 'no index'. You could also use index=no
--------------------------------------------------------------------------
Post by Dyck, Lionel B. , TRA
Lionel B. Dyck
-----Original Message-----
Behalf Of Dana Mitchell
Post by Dyck, Lionel B. , TRA
Sent: Wednesday, August 02, 2017 10:10 AM
Subject: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue
Lionel,
Excellent work with B2H, I've been experimenting with it also. I like
it, the price is right!
Post by Dyck, Lionel B. , TRA
B2H: Abend in line 7208 of B2H, RC=30
B2H: CondxC : SYNTAX
B2H: ErrText: Name or string > 250 characters
B2H: Source : return word(Abbrev.daid daid,1)
|B2H107 Info: Highest RC=30
Anyone else seen this, or is this perhaps something specific to our HCD
report? I'm in the process of debugging b2h to see what part of the HCD
report is causing this.
Post by Dyck, Lionel B. , TRA
Thanks
Dana
On Mon, 31 Jul 2017 06:30:01 -0500, Dyck, Lionel B. (TRA)
:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |
I also changed the code thus as the code appeared to assume PROFILE
NOPREFIX and kept failing until I did this.
Post by Dyck, Lionel B. , TRA
then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */
The command I run for my report is
'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'
And then I use XMITIP to email the html file to myself and it works nicely.
-----------------------------------------------------------------------
---
Lionel B. Dyck
Mainframe Systems Programmer - TRA
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
IBM United Kingdom Limited - Registered in England and Wales with number 741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Dyck, Lionel B. , TRA
2017-08-03 10:48:29 UTC
Permalink
Raw Message
Martin - I would agree

--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-***@LISTSERV.UA.EDU] On Behalf Of Martin Packer
Sent: Thursday, August 03, 2017 1:48 AM
To: IBM-***@LISTSERV.UA.EDU
Subject: Re: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue


By the way, as a frequent (almost daily) user of B2H in Production, I
wonder: What is the copyright status of B2H? I think it's abandonware and would like to treat it as open source.

In short, I'd join any effort to maintain B2H.

Thoughts?

Martin

Sent from my iPad
Post by Dyck, Lionel B. , TRA
Try using 'noindex' instead of 'no index'. You could also use
index=no
--------------------------------------------------------------------------
Post by Dyck, Lionel B. , TRA
Lionel B. Dyck
-----Original Message-----
Behalf Of Dana Mitchell
Post by Dyck, Lionel B. , TRA
Sent: Wednesday, August 02, 2017 10:10 AM
Subject: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue
Lionel,
Excellent work with B2H, I've been experimenting with it also. I like
it, the price is right!
Post by Dyck, Lionel B. , TRA
One question, when I produce the HCD report with 'No Index' I
receive
B2H: Abend in line 7208 of B2H, RC=30
B2H: CondxC : SYNTAX
B2H: ErrText: Name or string > 250 characters
B2H: Source : return word(Abbrev.daid daid,1)
|B2H107 Info: Highest RC=30
Anyone else seen this, or is this perhaps something specific to our HCD
report? I'm in the process of debugging b2h to see what part of the HCD
report is causing this.
Post by Dyck, Lionel B. , TRA
Thanks
Dana
On Mon, 31 Jul 2017 06:30:01 -0500, Dyck, Lionel B. (TRA)
:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |
I also changed the code thus as the code appeared to assume PROFILE
NOPREFIX and kept failing until I did this.
Post by Dyck, Lionel B. , TRA
then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */
The command I run for my report is
'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'
And then I use XMITIP to email the html file to myself and it works nicely.
---------------------------------------------------------------------
--
---
Lionel B. Dyck
Mainframe Systems Programmer - TRA
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
IBM United Kingdom Limited - Registered in England and Wales with number 741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Clark Morris
2017-08-03 14:05:37 UTC
Permalink
Raw Message
[Default] On 3 Aug 2017 03:48:29 -0700, in bit.listserv.ibm-main
Post by Dyck, Lionel B. , TRA
Martin - I would agree
This site says it is open source https://www.npmjs.com/package/b2h. An
HTML guide is here
Post by Dyck, Lionel B. , TRA
ftp://ftp.software.ibm.com/printers/products/dcf/samples/B2H.HTM.
Clark Morris
Post by Dyck, Lionel B. , TRA
--------------------------------------------------------------------------
Lionel B. Dyck
Mainframe Systems Programmer - TRA
-----Original Message-----
Sent: Thursday, August 03, 2017 1:48 AM
Subject: Re: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue
By the way, as a frequent (almost daily) user of B2H in Production, I
wonder: What is the copyright status of B2H? I think it's abandonware and would like to treat it as open source.
In short, I'd join any effort to maintain B2H.
Thoughts?
Martin
Sent from my iPad
Post by Dyck, Lionel B. , TRA
Try using 'noindex' instead of 'no index'. You could also use index=no
--------------------------------------------------------------------------
Post by Dyck, Lionel B. , TRA
Lionel B. Dyck
-----Original Message-----
Behalf Of Dana Mitchell
Post by Dyck, Lionel B. , TRA
Sent: Wednesday, August 02, 2017 10:10 AM
Subject: [EXTERNAL] Re: Friday Fun: hcd charts to htm via b2h issue
Lionel,
Excellent work with B2H, I've been experimenting with it also. I like
it, the price is right!
Post by Dyck, Lionel B. , TRA
One question, when I produce the HCD report with 'No Index' I
receive
B2H: Abend in line 7208 of B2H, RC=30
B2H: CondxC : SYNTAX
B2H: ErrText: Name or string > 250 characters
B2H: Source : return word(Abbrev.daid daid,1)
|B2H107 Info: Highest RC=30
Anyone else seen this, or is this perhaps something specific to our HCD
report? I'm in the process of debugging b2h to see what part of the HCD
report is causing this.
Post by Dyck, Lionel B. , TRA
Thanks
Dana
On Mon, 31 Jul 2017 06:30:01 -0500, Dyck, Lionel B. (TRA)
:SYM. bx0022 bx0220 V='*'
:SYM. bx0202 bx2020 bx2200 V='|' -- | | |
:SYM. bx2002 V='|' -- | | |
I also changed the code thus as the code appeared to assume PROFILE
NOPREFIX and kept failing until I did this.
Post by Dyck, Lionel B. , TRA
then pipcmd 'var dsnarg | SYSDSN | buffer | var dsnarg'
/* LBD: add quotes around dsnarg 07-28-2017 */
else dsnarg = SYSDSN("'"dsnarg"'") /* Changed */
The command I run for my report is
'%b2h IODF.CF.REPORT ( toc=no noindex title="AITC CF IODF Chart"'
And then I use XMITIP to email the html file to myself and it works
nicely.
Post by Dyck, Lionel B. , TRA
---------------------------------------------------------------------
--
---
Lionel B. Dyck
Mainframe Systems Programmer - TRA
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
IBM United Kingdom Limited - Registered in England and Wales with number 741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
----------------------------------------------------------------------
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to ***@listserv.ua.edu with the message: INFO IBM-MAIN
Loading...